Jump to content

英文维基 | 中文维基 | 日文维基 | 草榴社区

Lopper II Rail Tunnel

Coordinates: 46°58′39″N 8°19′10″E / 46.977403°N 8.319437°E / 46.977403; 8.319437
From Wikipedia, the free encyclopedia
(Redirected from Lopper II tunnel)
Lopper II Rail Tunnel
Overview
LineLuzern–Stans–Engelberg
LocationNidwalden, Switzerland
Coordinates46°58′39″N 8°19′10″E / 46.977403°N 8.319437°E / 46.977403; 8.319437
StatusActive
Operation
OwnerZentralbahn
OperatorZentralbahn
TrafficRail
CharacterPassenger and freight
Technical
Length1,743 metres (5,719 ft)
No. of tracks1
Track gauge1,000 mm (3 ft 3+38 in)
ElectrifiedOverhead catenary
11 kV AC 16 2/3 Hz

The Lopper II Rail Tunnel is a railway tunnel in the canton of Nidwalden in central Switzerland. It forms part of the Zentralbahn Luzern–Stans–Engelberg line, which links Lucerne with Engelberg, between Hergiswil station and Stansstad station. It is 1,743 metres (5,719 ft) in length, and carries metre gauge (1,000 mm or 3 ft 3+38 in) track electrified at 11 kV AC 16 2/3 Hz using overhead catenary. The tunnel runs under the Lopper, a shoulder of Mount Pilatus which extends into Lake Lucerne, and immediately on leaving the tunnel the line crosses a bridge over the Alpnachersee arm of Lake Lucerne before entering Stansstad station.[1][2]

The Lopper II Tunnel is paralleled by the Kirchenwald Tunnel carrying the A2 motorway. The nearby Lopper Tunnel I is a rail tunnel on the Zentralbahn Brünig line, the two rail lines joining at Hergiswil station.[1][2]

References

[edit]
  1. ^ a b map.geo.admin.ch (Map). Swiss Confederation. Retrieved 2014-07-25.
  2. ^ a b Eisenbahnatlas Schweiz. Verlag Schweers + Wall GmbH. 2012. p. 22. ISBN 978-3-89494-130-7.