Jump to content

英文维基 | 中文维基 | 日文维基 | 草榴社区

TM-62

From Wikipedia, the free encyclopedia
(Redirected from TM-62 series of mines)
TM-62 mine
TypeAnti-tank blast mine
Place of originSoviet Union
Service history
Used bySee Users
WarsSouth African Border War
Angolan Civil War
Mozambican Civil War
Second Sudanese Civil War
Russo-Ukrainian War
Production history
VariantsSee Variants
TM-62M – the wire safety clip is still in place; the mine has not been armed

The TM-62 is a Soviet anti-tank blast mine made in many variants. It has a central fuze and typically a 7.5 kilograms (17 lb) explosive charge, but the variants differ greatly in detail. The mine can be laid manually or automatically from a mine laying machine including the PMR-1, PMR-2 wheeled towed mine layers, the GMZ-3 tracked mine laying vehicle and the VMR-2 helicopter mine laying system. The TM-62 can be fitted with the same fuzes as the TM-72, which include MVN-72 and MVN-80 fuzes, which are vibration and magnetism sensitive. The mine was used in the 2022 Russian invasion of Ukraine.[1]

Variants

[edit]
TM-62 mine
  • TM-62M, with a circular metal case. It is the most widely employed variant.
  • TM-62B, with a paper or cardboard case – basically a block of cast explosive with a fuze set into the center.
  • TM-62D, with a wooden case.
  • TM-62P, TM-62P2 and TM-62P3, with plastic cases. The TM-62P and TM-62P2 mine cases have ribbed sides, whereas the TM-62P3 has a smooth casing.
  • TM-62T, with a fabric and epoxy casing and a central fuze.

Fuzes

[edit]
  • MVZ-62
  • MVCh-62, the standard fuze with a clockwork arming delay of 30 to 120 seconds.
  • MVN-62
  • MVN-72, with a combination of electronics and clockwork, after an initial arming delay the magnetic influence fuze is enabled, powered by a 1.5 V battery.
  • MVN-80, an improved version of the MVN-72.
  • VM-62Z
  • MVP-62, with a pneumatic bellows arming delay of 20 to 300 seconds. The delay mechanism uses a minimum of metal making it difficult to detect when used with one of the minimum metal cases.
  • MVP-62M
  • ZN-97, a magnetic influence fuze made in Poland.

Magnetic influence fuzes provide full-width attack, i.e. any part of the target vehicle passing over the mine will trigger detonation, not just the track or wheels. However, since magnetic fuzes are electronic, their operational life relies on battery power. Ultimately the battery will run down, after which the mine no longer functions. In contrast, a purely mechanical fuze (usually triggered via a Belleville spring) gives a much longer operational life (e.g., mines planted 50 years previously will still detonate if a target vehicle drives over them).

Specifications (TM-62M with MVZ-62 fuze)

[edit]
  • Weight: 9.5 kilograms (21 lb)
  • Explosive content: 7.5 kilograms (17 lb) of TNT (although sometimes combinations of RDX/TNT/Aluminium or Amatol mixes are used)
  • Diameter: 320 millimetres (13 in)
  • Height: 128 millimetres (5.0 in)
  • Operating pressure: 150 to 550 kilograms (330 to 1,210 lb)

Users

[edit]
Map with TM-62 users in blue


See also

[edit]

References

[edit]
  1. ^ Мельникова, Виктория (2024-08-02). "ВС РФ применили переделанные мины ТМ-62 для подрыва «опорников» противника". AiF (in Russian). Retrieved 2024-08-03.
  • Jane's Mines and Mine Clearance 2005–2006