Deflagration to detonation transition
 | This article needs additional citations for verification. (February 2017) |
Deflagration to detonation transition (DDT) refers to a phenomenon in ignitable mixtures of a flammable gas and air (or oxygen) when a sudden transition takes place from a deflagration type of combustion to a detonation type of explosion.
Description
[edit]A deflagration is characterized by a subsonic flame propagation velocity, typically far below 100 metres per second (220 mph), and relatively modest overpressures, typically below 50 kilopascals (7.3 psi). The main mechanism of combustion propagation is of a flame front that moves forward through the gas mixture - in technical terms the reaction zone (chemical combustion) progresses through the medium by processes of diffusion of heat and mass. In its most benign form, a deflagration may simply be a flash fire.
In contrast, a detonation is characterized by supersonic flame propagation velocities, perhaps up to 2,000 metres per second (4,500 mph), and substantial overpressures, up to 2 megapascals (290 psi). The main mechanism of detonation propagation is of a powerful pressure wave that compresses the unburnt gas ahead of the wave to a temperature above the autoignition temperature. In technical terms, the reaction zone (chemical combustion) is a self-driven shock wave where the reaction zone and the shock are coincident, and the chemical reaction is initiated by the compressive heating caused by the shock wave. The process is similar to ignition in a Diesel engine, but much more sudden and violent.
Under certain conditions, mainly in terms of geometrical conditions (such as partial confinement and many obstacles in the flame path that cause turbulent flame eddy currents), a subsonic flame front may accelerate to supersonic speed, transitioning from deflagration to detonation. The exact mechanism is not fully understood,[1] and while existing theories are able to explain and model both deflagrations and detonations, there is no theory at present[update] which can predict the transition phenomenon.
Examples
[edit]A deflagration to detonation transition has been a feature of several major industrial accidents:
- 1970 propane vapor cloud explosion in Port Hudson
- Flixborough disaster
- Phillips disaster of 1989 in Pasadena, Texas
- Damage observed in the Buncefield fire
- 2020 Beirut explosions
Applications
[edit]The phenomenon is exploited in pulse detonation engines, because a detonation produces a more efficient combustion of the reactants than a deflagration does, i.e. giving a higher yields. Such engines typically employ a Shchelkin spiral in the combustion chamber to facilitate the deflagration to detonation transition.[2][3]
The mechanism has also found military use in thermobaric weapons.
Related phenomena
[edit]An analogous deflagration to detonation transition (DDT) has also been proposed for thermonuclear reactions responsible for supernovae initiation.[4] This process has been called a "carbon detonation".
See also
[edit]- Zeldovich spontaneous wave
- Dust explosion
- Pressure piling
- Boiling liquid expanding vapor explosion (BLEVE)
References
[edit]- ^ "Chapter 6: Detonation". Gexcon AS. Archived from the original on October 4, 2011.
- ^ New, TH; PK Panicker; FK Lu; H M Tsai (2006). Experimental Investigations on DDT Enhancements by Schelkin Spirals in a PDE (PDF). 44th AIAA Aerospace Sciences Meeting and Exhibit 9–12 January 2006, Reno, Nevada.
- ^ Schultz, E; E Wintenberger; J Shepherd (1999). Investigation of Deflagration to Detonation Transition for Application to Pulse Detonation Engine Ignition Systems (PDF). Proceedings of the 16th JANNAF Propulsion Symposium.
- ^ Gamezo, Vadim N.; Oran ES (2008). Mechanisms for Detonation Initiation in Type Ia Supernovae. American Astronomical Society, AAS Meeting #211, #162.08. Bibcode:2008AAS...21116208G.
- Lea, CJ; HS Ledin (2002). A Review of the State-of-the-Art in Gas Explosion Modelling, HSL/2002/02 (PDF). UK Health and Safety Laboratories.