Grigorovich MRL-1

MRL-1
Role	Reconnaissance flying boat
Designer	Dmitry Pavlovich Grigorovich
First flight	2 June 1925
Primary user	Soviet Navy
Number built	1

The Grigorovich MRL-1 was a long-range reconnaissance flying boat designed by the Grigorovich Design Bureau for the Soviet Navy in the mid-1920s.

Design

The MRL-1 had a very elegant and clean appearance, but the hull construction was very expensive due to the overuse of expensive redwood, and therefore seriously overweight. Gunner position was located right behind the propeller.

Although speed requirements were fulfilled, the ceiling and climb were unacceptably poor, and the flawed hull design precipitated 'wave pushing' and delayed takeoff. Therefore, the MRL-1 was not accepted for production, the lone airframe instead spending its career with the White Sea Fleet.

Specifications

Data from , Aircraft of the Soviet Union : the encyclopaedia of Soviet aircraft since 1917

General characteristics

• Crew: 2
• Length: 10.6 m (34 ft 9 in)
• Wingspan: 13.2 m (43 ft 4 in)
• Wing area: 50.0 m² (538 sq ft)
• Empty weight: 1,660 kg (3,660 lb)
• Max takeoff weight: 2,600 kg (5,732 lb)
• Powerplant: 1 × Liberty L-12 V-12 water-cooled piston engine, 300 kW (400 hp)

Performance

• Maximum speed: 185 km/h (115 mph, 100 kn)
• Endurance: 5 hours
• Service ceiling: 3,050 m (10,010 ft)
• Time to altitude: 1,000 m (3,281 ft) in 11.0 minutes
• Wing loading: 52.0 kg/m² (10.7 lb/sq ft)

Armament

• Guns: 1-2 x machine guns

Bibliography

• Kulikov, Victor (December 1996). "Le fascinante histoire des hydravions de Dimitry Grigorovitch" [The Fascinating History of the Seaplanes of Dimitry Grigorovitch]. Avions: Toute l'aéronautique et son histoire (in French) (45): 20–33. ISSN 1243-8650.