Jump to content

英文维基 | 中文维基 | 日文维基 | 草榴社区

HMS Scorpion (1863)

From Wikipedia, the free encyclopedia

History
United Kingdom
NameHMS Scorpion
Ordered1862
BuilderJohn Laird Sons & Company, Birkenhead
Laid downApril 1862
Launched4 July 1863
Completed10 October 1865
Fate
  • Sunk as target 1901
  • Refloated 1902; sold for scrap
  • Foundered 17 June 1903
General characteristics
TypeIronclad turret ship
Displacement2,751 long tons (2,795 t)
Length224 ft 6 in (68.4 m) (p/p)
Beam42 ft 4 in (12.9 m)
Draught17 ft (5.2 m) (deep load)
Installed power
Propulsion2 shaft, 2 direct-acting steam engines
Sail planBarque-rigged
Speed10.5 knots (19.4 km/h; 12.1 mph)
Range1,210 nmi (2,240 km; 1,390 mi) at 10 kn (19 km/h; 12 mph)
Complement153
Armament2 × twin 9-inch (229 mm) muzzle-loading rifles
Armour
  • Belt: 2–4.5 in (51–114 mm)
  • Gun turrets: 5.5–10 in (140–254 mm)
Notessister ship: HMS Wivern

HMS Scorpion was an ironclad turret ship built by John Laird Sons & Company, at Birkenhead, England. She was one of two sister ships secretly ordered from the Laird shipyard in 1862 by the Confederate States of America.

Her true ownership was concealed by the fiction that she was being built as the Egyptian warship El Tousson. She was to have been named CSS North Carolina upon delivery to the Confederacy. Her sister was built under the false name El Monassir and was to have been renamed CSS Mississippi. In October 1863, a few months after their launch and before they could be completed, the UK Government seized the two ironclads.

In 1864 the Admiralty bought them and commissioned them into the Royal Navy: El Tousson as HMS Scorpion and El Monassir as HMS Wivern. Scorpion had a long Royal Navy career, until she was lost in the North Atlantic in 1903.

Design and description

[edit]

North Carolina and her sister were intended, together with other warships, to break the Federal blockade of Confederate coastal cities and to hold some Northern cities for ransom.[1] The ships had a length between perpendiculars of 224 feet 6 inches (68.4 m), a beam of 42 feet 4 inches (12.9 m),[2] and a draught of 17 feet (5.2 m) at deep load. They displaced 2,751 long tons (2,795 t). The hull was divided by 12 watertight bulkheads and the ships had a double bottom beneath the engine and boiler rooms. Their crew consisted of 152 officers and ratings.[3]

The Scorpion-class ships had two horizontal direct-acting steam engines, built by Lairds, each driving a single propeller shaft, using steam provided by four tubular boilers. The engines produced a total of 1,450 indicated horsepower (1,080 kW) which gave the ships a maximum speed of 10.5 knots (19.4 km/h; 12.1 mph).[3] The ships carried 336 long tons (341 t) of coal, enough to steam 1,210 nautical miles (2,240 km; 1,390 mi) at 10 knots (19 km/h; 12 mph).[3] They were barque-rigged with three masts. The funnel was made semi-retractable to reduce wind resistance while under sail.[4]

No ordnance had been ordered by the Confederates before the ships were seized in 1863, but in British service they mounted a pair of 9-inch rifled muzzle-loading guns in each turret. The guns could fire both solid shot and explosive shells.[5] According to Parkes, going from full depression to full elevation supposedly took one hour in smooth water and with an even keel![4]

The Scorpion-class ships had a complete waterline belt of wrought iron that was 4.5 inches (114 mm) thick amidships and thinned to 3 inches (76 mm) at the bow and 2.5 inches (64 mm) at the stern. It completely covered the hull from the upper deck to 3 feet 3 inches (0.99 m) below the waterline.[2] The armour protection of the turrets was quite elaborate. The inside of the turret was lined with .5 inches (12.7 mm) of iron boiler plate to which T-shaped beams were bolted. The space between the beams was filled with 10 inches (254 mm) of teak. This was covered by an iron lattice .75 inches (19.1 mm) thick that was covered in turn by 8 inches (203 mm) of teak. The 5.5-inch (140 mm) iron plates were bolted to the outside using bolts that ran through to the interior iron "skin". The area around the gun ports was reinforced by 4.5-inch plates to give a total thickness of 10 inches. The turret roof consisted of T-shaped beams covered by 1-inch (25 mm) iron plates.[6]

Construction and career

[edit]
H.B. Majesty's steamer Majestic watching the rebel rams in the Mersey, 1863. Tousson, far left.

In early 1864, the Admiralty purchased both for the Royal Navy and named them Scorpion and Wivern. Commissioned in July 1865, Scorpion was assigned to the Channel Fleet until 1869, with time out for a refit that reduced her sailing rig from a bark to a schooner. In late 1869, she moved to Bermuda for coast and harbour defence service. Scorpion remained there for over three decades before being removed from the effective list. Scorpion was sunk as a target in 1901 but raised the next year and sold in February 1903. She was lost at sea while under tow to the U.S., where she was to be scrapped.[7]

Notes

[edit]
  1. ^ Scharf, p. 784
  2. ^ a b Gardiner, p. 20
  3. ^ a b c Parkes, p. 78
  4. ^ a b Parkes, p. 79
  5. ^ Gardiner, p. 6
  6. ^ Putnam, p. 11
  7. ^ "HMS Scorpion". United States Navy Historical Center (United States Navy). Retrieved 19 August 2008.

References

[edit]