Talk:Vapour-pressure deficit
 | This article is rated Start-class on Wikipedia's content assessment scale. It is of interest to the following WikiProjects: | ||||||||||
| |||||||||||
.jpg){kind=small}
Equation
[edit]I have tried using the equation given in the present article to calculate atmospheric VPD from air temperature and RH and found the answer to be clearly wrong (off by many orders of magnitude). I then followed the second reference link to "Ohio State University Extension Fact Sheet" and followed thier equation and found the asnwer to be reasonable. I then clicked on the first reference link to autogrow.com and found a VPD calculator. The VPD calculator gave me yet a different answer. Here is my math (note I took out the scientific notation in case excel was choking on it and also tried punching this out on my TI-82 which confirmed that excel was not the problem).
Temperature: 24.04 C
RH: 44.75%
(these readings were recorded on a datalogger in a greenhouse)
Temperature conversions:
To K: 24.04 + 273.15 = 297.19 K
To F: (212-32)/100*24.04+32 = 75.272 F
To R: (what is R scale for temperature?) 75.272 + 459.67 = 534.942
Using the Wikipedia equation for VP sat:
VPsat = EXP((-18800/297.19) - 13.1 + (-0.015*297.19) + (0.0000008*(297.19^2)) + (-0.0000000000169*(297.19^3)) + (6.456*(LN(297.19)))) = 7.907E-20 kPa
VPair = 7.907E-20 x (44.75/100) = 3.538E-20 kPa
VPD = VPsat - VPair = 7.907E-20 - 3.538E-20 = 4.37 kPa
Using Ohio State University Extension Fact Sheet equation:
VPsat = EXP((-10440/534.942) - 11.129 + (-0.02702*534.942) + (0.00001289*(534.942^2)) + (-0.00000000247*(534.942^3)) + (6.456*LN(534.942))) = 0.29196 psi
VPair = 0.29196 x (44.75/100) = 0.13065 psi
VPD = 0.29196 - 0.13065 = 0.1613 Psi
0.1613 * 6.89475729 = 1.112 kPa
Using the autogrow.com VPD calculator:
VPD = 1.65 Kpa
___________________________
After quite a bit of research, I suggest the equations used by LiCor Inc. (www.licor.com) in thier LI-6400 device. These equations give results that seem to match up well with the calculations done by autogrow.com's calculator.
Reference: http://www.licor.com/env/Products/li6400/6400_manuals.jsp Click on "instruction manual" and go to book 3 pg 14-10.
The link above does not work! —Preceding unsigned comment added by 203.25.1.208 (talk) 04:00, 22 October 2010 (UTC)
The above link will give you the equation for VPsat. You must then multiply by the RH to get VPair and then subrtact VPair from VPsat to get VPD (as done in above examples).
X
[edit]The X in the equation is so stylized that I thought it was a variable. A note should be added that the X is the times symbol but a better solution would be to rewrite the equation shown. (Even while writing this I find it hard to believe such a problem exists.) — Preceding unsigned comment added by 198.103.184.76 (talk) 19:39, 7 March 2012 (UTC)
Relationship with CO2
[edit]Some people claim that increased CO2 in the atmosphere is actually good for plants. However, this beneficial effect may actually be cancelled out by the vapor-pressure deficit which may increase along with the ever-increasing global average surface temperature. In light of this, doesn't this merit discussion in the article? In the current version of this article, carbon dioxide isn't mentioned a single time. 98.123.38.211 (talk) 23:18, 10 November 2024 (UTC)