Template talk:Infobox fluorine

This template was considered for deletion on 3 April 2012. The result of the discussion was "keep".

heat capacity

Heat capacity in source (viewable in Google Books)is in per kg not per mol. This page currently has the incorrect per mol. — Preceding unsigned comment added by 145.225.17.100 (talk) 13:00, 29 May 2012 (UTC)[reply]

Density

I suspect this edit of Revision as of 07:13, 29 September 2010: link to edit is in error. It claims the density of liquid fluorine at boiling temperature is 1.108g/cm3, with no citation.

According to a company that actually makes the stuff, the density is 1.502g/cm3 their encyclopedia page

For an entertaining history of how this error came to be, see Ignition and search for "Dewar" for the original error. Scott Kilner found a closer value.

Sorry if this is badly structured. The page is locked to edits for newbies, and I don't want to invest the time to build the reputation points and learn the syntax to correct it myself.

Cheers,

Fixed, thanks. The error comes from early reports which were found incorrect here doi:10.1021/ja01124a512 and later on. Materialscientist (talk) 01:19, 11 January 2011 (UTC)[reply]

remove main article isotopes?

Can we remove the "main article isotopes"? how? (we already have the link in article, and it seems out of place to have this here when it is mostly data, not links to other F stuff.)TCO (talk) 13:57, 15 June 2011 (UTC)[reply]

Edit request on 15 September 2013

This edit request has been answered. Set the |answered= or |ans= parameter to no to reactivate your request.

Cut electron shell image: electron shell image=Electron shell 009 Fluorine (diatomic nonmetal) - no label.svg

98.117.75.177 (talk) 12:38, 15 September 2013 (UTC)[reply]

Not done I've already mentioned why I don't think this is a good idea (consistency blah blah blah makes the reader go huh and I forgot my other arguments from last time but I'm sure I'll think of them if I want to) and I still don't.

Anyway we discuss electron configuration in many other articles (I'm pretty sure many of R8R's like In and Lu start by mentioning what the electron configuration is, Hg also goes in depth about what the electron configuration does.) It is pretty, gives consistency, and honestly doesn't hurt anything. So, not done, sorry. Double sharp (talk) 14:27, 15 September 2013 (UTC)[reply]

It's just that I cover it fine in article and have a graphic in text. I just think takes up extra space in template for this particular article. No biggie though.69.255.27.249 (talk) 21:10, 15 September 2013 (UTC)[reply]

please cut the crystal forms

Not the drawings (not that argument), but just listing them at all. F2 is a gas at room temperature. This will help shorten the infobox. One of the issues people have with infoboxes is the tendancy to want to fill every field possible rather than being selective.208.44.87.91 (talk) 04:19, 16 October 2013 (UTC)[reply]

Room temperature is not the be-all and end-all of the elements. We list the most common and stable allotrope usually. Why do you think we show both α-Sn and β-Sn in Sn's infobox? In a case like F where the element is gaseous we show the crystal structure as a solid, which is consistent. Would you remove the crystal structure diagram from Hg? Double sharp (talk) 06:01, 16 October 2013 (UTC)[reply]

We give the melting and boiling points. The infobox is too long and bloated. Just because a parameter exists does not mean it should be filled out every time. Only key points. What next, the mechanical properties of alpha fluorine? High pressure forms of oxygen? Sulfur's 20 allotropes?[Special:Contributions/208.44.87.91|208.44.87.91]] (talk) 11:56, 16 October 2013 (UTC)[reply]

On my screen, It is 5 screens long. It will interfere with the History image on some displays It's huge. We need to be selective. This would apply to the infobox of a person too. This is a classic case of filling in every parameter (which the infoboxers say they don't do...but do.)208.44.87.91 (talk) 12:02, 16 October 2013 (UTC)[reply]

I find the argument of "infobox size" used here a bit misplaced. If there are reasons to remove data from it for reasons of relevance, they should be used (and consistemntly over all infoboxes, so at WT:ELEM). If size is a matter, then too at WT:ELEM not on an individual box page. I also note that there are non-removal options to be regarded. These could be introduced once the topic of size is introduced (not "non-element" or relevance). -DePiep (talk) 10:37, 22 October 2013 (UTC)[reply]

Yeah, I don't think we ought to discard fields just because they don't make sense at STP. The crystal structure is known. Removing it gives the impression that it is not even in solid state or perhaps that F is amorphous in the solid state. I would be OK with removing the entire field in the case of an element where we really don't know the crystal structure (e.g. {{Infobox ununseptium}}) – and we already do that. Double sharp (talk) 14:51, 22 October 2013 (UTC)[reply]

I add: with "non-removal changes" I mean we could try a smaller font in the infobox and such. More when I'm back from RL. -DePiep (talk) 15:17, 22 October 2013 (UTC)[reply]

We could triple the size of the infobox if we wanted to (acoustic properties, mechanical, etc. etc.). Length absolutely is a relevant consideration for articles and for infoboxes. We need to be selective and not crufty. I could fill a book on the element and a book on data for the box. This is a classic infobox issue: that people want to fill in every parameter rather than being selective. I mean why two different crystal forms (avec low value diagrams) for a gas? What will you do for oxygen or a gas (or solid) that has been studied at high pressure and has many more forms?208.44.87.91 (talk) 01:34, 23 October 2013 (UTC)[reply]

One is fine. I'm honestly fine as long as there's at least one listed, preferably the most stable. I won't insist on more except for special cases like Sn. I just don't want to remove the field completely. Double sharp (talk) 02:57, 24 October 2013 (UTC)[reply]

Just do it already, then. Leave alpha fluorine (main solid phase over most degree width and with well defined structure) and cut beta (a disordered phase encountered for a few degrees just prior to melting). Or do you need to check with DePiep for special permission? I think I have a little more stake in this article (and knowledge of the content and ability to communicate to readers).208.44.87.91 (talk) 03:16, 24 October 2013 (UTC)[reply]

Done Double sharp (talk) 04:22, 24 October 2013 (UTC)[reply]

See what you can do to shorten it

I cut well over 50% of Compounds section. Apply a little selective shears to the infobox. Less is more sometimes.208.44.87.91 (talk) 12:35, 16 October 2013 (UTC)[reply]

Take an experiment and try prioritizing.208.44.87.91 (talk) 00:52, 23 October 2013 (UTC)[reply]

reference(12) in isotopes section

Peer reviewer questions this (and it looks bad to me also). Please put the reference somewhere (like on the header for isotopes). Saves us a line of length also.208.44.87.91 (talk) 02:04, 17 October 2013 (UTC)[reply]

Please fix this. It is a different issue from the above. Was raised in peer review. None of the proposed referencing methods are what was done here.208.44.87.91 (talk) 00:52, 23 October 2013 (UTC)[reply]

Please fix the heat capacity. The value is actually in error. See discussion on talk page at Fluorine.

208.44.87.91 (talk) 01:32, 23 October 2013 (UTC)[reply]

Done Double sharp (talk) 03:16, 24 October 2013 (UTC)[reply]

TCO has hugged you! Hugs promote WikiLove and hopefully this one has made your day better (and hopefully wasn't meant as an invasion of personal space). Spread the WikiLove by hugging at someone else, whether it be someone you have had disagreements with in the past or a good friend. Happy editing!
Hug others by adding {{subst:Hug}} to their talk page with a friendly message.

Semi-protected edit request on 28 January 2015

This edit request has been answered. Set the |answered= or |ans= parameter to no to reactivate your request.

I believe that the density is being reported wrong. 1.696 g/L seems to be about 1000 times out (it is comparable to the density of air). I suspect that the unit should be g/cm3 139.184.113.20 (talk) 13:18, 28 January 2015 (UTC)[reply]

Fluorine is a gas at standard conditions: it stands to reason that its density should be comparable to that of air. If the unit were g/cm³ it would have to be denser than water, which is obviously not the case. Double sharp (talk) 13:54, 28 January 2015 (UTC)[reply]

Semi-protected edit request on 8 May 2021

This edit request has been answered. Set the |answered= or |ans= parameter to no to reactivate your request.

Change the "named by" section in the graphic on the right of the page from "Humphry Davy" to "André-Marie Ampère".

In the history section of the article, it states that "[Ampère] also proposed in a letter to Sir Humphry Davy dated August 26, 1812 that this then-unknown substance may be named fluorine from fluoric acid and the -ine suffix of other halogens.[82][83]" which clearly states Ampère named in, not Davy 72.230.140.96 (talk) 19:07, 8 May 2021 (UTC)[reply]

Partly done: Added both names, I don't see reason to remove Davy RandomCanadian (talk / contribs) 23:26, 8 May 2021 (UTC)[reply]

Looks like Davy's involvement with fluorine needs more source checking. His article does not mention it, nor does his RI list. -DePiep (talk) 09:04, 9 May 2021 (UTC)[reply]